• Project & Industrial Activities

    See More...

    News & Events

    Important Links

  • Indexed Articles from Journals

    July 2015

        1  ALLENA, S. and NEWTSON, C.M.

    Shrinkage of ultra-high strength concrete.

    Indian Concr J 2013 December; 87(12):  53-

    E3810-11.

    Control No. : 40904

    2  AMICK, H. and MONTEIRO, J.M.

    Temperature and frequency effects on properties of

    polymer modified concrete.

    ACI Mater J 2013 Mar-Aapr; 110(2):  187-96

    E3810-11.

    Control No. : 40849

    3  ANON

    Industrial concrete repair.

    Indian Cem Rev 2014 March; 28(8):  60-

    E3810-11.

    Control No. : 40926

    4  ANON

    Ready mixed concrete : RMCMA brings NRMCA concrfete

    technologist certification course to India.

    Indian Concr J 2013 August; 87(8):  36-38

    E3808-09.

    Control No. : 40839

    5  ANON

    Underwater natural marvel modeled in concrete.

    Concr Inter 2014 September; 36(9):  24-25

    E3810-11.

    Control No. : 40886

    6  ATAMTURKTUR, H.S., et al

    Detection of internal defects in concrete members using

    global vibration characteristics.

    ACI Mater J 2013 Sept-Oct; 110(5):  529-38

    E3810-11.

    Control No. : 40892

    7  BAPAT, J.D.

    Quality of coal for Indian cement industry.

    Indian Cem Rev 2014 March; 28(8):  40-

    E3810-11.

    Control No. : 40924

    8  BENTUR, A., et al

    Preservation of telescopic bonding upon aging of bundled

    glass filaments by treatments with nano-particles.

    Cem  Concr Res 2013 May; 47:  69-77

    E3810-11.

    Control No. : 40868

    ** – Keywords                       1

     

    9  BENTZ, D.P., et al

    Predicting service life of steel-reinforced concrete

    exposed to chlorides .

    Concr Inter 2014 September; 36(9):  55-

    E3810-11.

    Control No. : 40884

    10  BENTZ, D.P., et al

    Viscosity modifiers to enhance concrete performance.

    ACI Mater J 2013 Sept-Oct; 110(5):  495-502

    E3810-11.

    Control No. : 40888

    11  BHANJA, S.and PAN, S.

    Modified water-cement ratio law for fly ash concrete.

    Indian Concr J 2013 October; 87(10):  21-38

    E3810-11.

    Control No. : 40910

    12  BISHNOL, S.

    Geometric limitations of nucleation and growth models :

    Revisiting the impingement assumption.

    Cem Concr Res 2013 April; 46:  30-40

    E-3810-11.

    Control No. : 40857

    13  BOZZO, L.M.

    Santa Fe II tower : Central core, tall, slender building

    in Mexico .

    Concr Inter 2014 September; 36(9):  51-54

    E3810-11.

    Control No. : 40883

    14  BULICHEN, D.and PLANK, J.

    Water retention capacity and working mechanism of methyl

    hydroxypropyl cellulose (MHPC) in gypsum plaster – which

    impact has sulfate .

    Cem Concr Res 2013 April; 46:  66-72

    E3810-11.

    Control No. : 40860

    15  CARR, S.

    Precast concrete  : Hollowcore manufacture and factory

    design .

    Indian concr J 2013 August; 87(8):  20-25

    E3808-09.

    Control No. : 40838

    16  CHEN, W., et al

    Determining supplementary admixturecontent in fresh

    concrete with ground-penetrating radar .

    ACI Mater J 2013 Sept-Oct; 110(5):  587-96

    E3810-11.

    Control No. : 40898

    17  CHUNG, C.-W. et al

    Setting and stiffening of cementitious components in cast

    stone waste form for disposal of secondary wasttes from

    ** – Keywords                       2

     

    the Hanford waste treatment and immobilization plant.

    Cem Concr Res 2013 April; 46:  14-22

    E-3810-11.

    Control No. : 40855

    18  DE, D.

    Around 60 percent of operating costs are determined

    before the cement plant is set up and commissioned .

    Indian Cem Rev 2014 February; 28(7):  48-

    E3810-11.

    Control No. : 40930

    19  DHANYA, B,S. and SANTHANAM, M.

    Performance specification for concrete construction in

    india : Are we ready.

    Indian Concr J 2013 September; 87(9):  36-

    E3810-11.

    Control No. : 40901

    20  DHAR, B.

    Ultratech cement plants have been at the forefront in

    terms of energy efficiency.

    Indian Cem Rev 2014 February; 28(7):  38-

    E3810-11.

    Control No. : 40927

    21  DHOLE, R., et al

    Characterization of fly ashes for sulfate resistance.

    ACI Mater J 2013 Mar-Apr; 110(2):  159-68

    E3810-11.

    Control No. : 40846

    22  DOUNG HOOTON, R.

    Twenty-year field evaluation of alkali-silica reaction

    mitigation .

    ACI Mater J 2013 Sept-Oct; 110(5):  539-48

    E3810-11.

    Control No. : 40893

    23  EL-HASSAN, H. et al

    Effect of initial curing on carbaonation of lightweight

    concrete masonry units .

    ACI Mater J 2013 July-Aug; 110(4):  441-50

    E3810-11.

    Control No. : 40878

    24  FATHIFAZI, G. and RAZAQPUR, A.G.

    Creep rheological models for recycled aggregate concrete.

    ACI Mater J 2013 Mar-Apr; 110(2):  115-26

    E3801-11.

    Control No. : 40842

    25  GEORGE, R.P., et al

    Studies on biodegradation of normal concrete surfaces by

    fungus Fusarium, sp.

    Cem Concr Res 2013 May; 47:  8-13

    E3810-11.

    Control No. : 40862

    ** – Keywords                       3

    26  GEORGIO, P. , et al

    Effect of secondary cracks for cracking analysis of

    reinforced concrete tie.

    ACI Mater J 2013 Mar-Aapr; 110(2):  207-14

    E3810-11.

    Control No. : 40851

    27  GHODS, P., et al

    Nano-scale study of passive films and chloride-induced

    depassivation of carbon steel rebar in simulated concrete

    pore solutions using FIB/TEM  .

    Cem  Concr Res 2013 May; 47:  55-68

    E3810-11.

    Control No. : 40867

    28  GRATTAN-BELLEW, P.E. and CHAN, G.

    Comparison of the morphology of alkali-silica gel formed

    in limestones in concrete affected by the so-called

    alkali-carbonate reaction (ACR) and alkali silica

    reactions (ASR).

    Cem  Concr Res 2013 May; 47:  51-54

    E3810-11.

    Control No. : 40866

    29  GRAYBEAL,B.A. and BABY,F.

    developament of direct tension test method for ultra high

    performance fiber-reinforced concrfete .

    ACI Mater J 2013 Mar-Aapr; 110(2):  177-86

    3810-11.

    Control No. : 40848

    30  HARGIS, C.W., et al

    Aggregate passivation : Lithium hydroxide aggregate

    treatment to suppress alkali-silica reaction.

    ACI Mater J 2013 Sept-Oct; 110(5):  567-76

    E3810-11.

    Control No. : 40896

    31  HARISH, K.V., et al

    Mechanical properties of ultra-high performance concrete

    using conventional materials in India.

    Indian Concr J 2013 December; 87(12):  9-

    E3810-11.

    Control No. : 40902

    32  HU, B. et al

    Embedded piezoelectric sensors for health monitoring of

    concrete structures.

    ACI Mater J 2013 Mar-Apr; 110(2):  149-58

    E3810-11.

    Control No. : 40845

    33  JAMNEKAR, V.P. and CHAUDHARI, D.J.

    Earthquake engineering : Effect of brick  masonry infill

    in seismic evaluation of an existing RC building.

    Indian Concr J 2013 August; 87(8):  46-51

    E3808-09.

    Control No. : 40841

    ** – Keywords                       4

     

    34  JAYAKUMAR, K.

    Creep and shrinkage behaviour of High performance

    concrete.

    Indian Concr J 2013 October; 87(10):  39-47

    E3810-11.

    Control No. : 40911

    35  JONES, C.S.

    Ensuring strength and durability through slump retention.

    Indian Cem  Rev 2014 February; 28(7):  61-

    E3810-11.

    Control No. : 40918

    36  KAMPMANN,R., et al

    Contribution of specimen surface friction to size effect

    and rupture behavior of concrfete.

    ACI Mater J 2013 Mar-Apr; 110(2):  169-76

    E3810-11.

    Control No. : 40847

    37  KAND, C.V.

    Bridge construction : Narmada bridge at Kasarvad near

    Badwani.

    Indian Concr J 2013 September; 87(9):  11-

    E3810-11.

    Control No. : 40900

    38  KANTHE, V.N. and DHAKE, P.D.

    Experiment study of ferrocement beams.

    Indian concr J 2013 August; 87(8):  55-62

    E3808-09.

    Control No. : 40837

    39  KESKE, S.M., et al

    Assessment of stability test methods for self-

    consolidating concrete.

    ACI Mater J 2013 Jul-Aug; 110(4):  385-94

    E3810-11.

    Control No. : 40872

    40  KNAACK, A.M. and KURAMA, Y.C.

    Design of concrete mixtures with recycled cocrete

    aggregates.

    ACI Mater J  2013 Sept-Oct; 110(5):  483-94

    E3810-11.

    Control No. : 40887

    41  KUNTHER, W., et al

    On the relevance of volume increase for the length

    changes of mortar bars in sulfate solutions.

    Cem Concr Res 2013 April; 46:  23-29

    E-3810-11.

    Control No. : 40856

    42  LAI, J., et al

    Dynamic properties of reactive powder concrete subjected

    to repeated impacts .

    ACI Mater J 2013 July-Aug; 110(4):  463-72

    ** – Keywords                       5

     

    E3810-11.

    Control No. : 40880

    43  LALU, V.P.and JEENU, G.

    Simplified mix proportioning method for high performance

    concrete.

    Indian Concr J 2013 October; 87(10):  10-20

    E3810-11.

    Control No. : 40909

    44  LANG, N. and MORRISON

    ACI adds masonry testing technician certification.

    Concr Int 2014 September; 36(9):  21-23

    E3810-11.

    Control No. : 40885

    45  LASKAR, A.I. and BHATTACHARJEE, R.

    Effect of plasticizer and superplasticizers on rheology

    of fly-ash-based geopolymer concrete.

    ACI Mater J 2013 Sept-Oct; 110(5):  513-18

    E3810-11.

    Control No. : 40890

    46  LEDERIA, R.E. AND HILLER, J.E.

    Reversible shrinkage of concrete made with recycled

    concrete aggregate and other aggregate types.

    ACI Mater J 2013 Jul-Aug; 110(4):  423-32

    E3810-11.

    Control No. : 40876

    47  LEE, M.K., et al

    Effects of carbonation on chloride penetration in

    concrete .

    ACI Mater J 2013 Sept-Oct; 110(5):  559-65

    E3810-11.

    Control No. : 40895

    48  LEE, S.C., et al

    Simplified diverse embedment model for steel fiber-

    reinforced concrete elements in tension.

    ACI Mater J 2013 Jul-Aug; 110(4):  403-12

    E3810-11.

    Control No. : 40874

    49  LEQUESNE, R.D. and PINCHEIRA, J.A,

    Proposed revisions to the strength-reduction factor for

    axially loaded members .

    Concr Inter 2014 September; 36(9):  43-50

    E3810-11.

    Control No. : 40882

    50  LIN, Y-W.

    Durability propertyies of sparayed engineered cmentitious

    composite.

    ACI Mater J 2013 Sept-Oct; 110(5):  503-12

    E3810-11.

    Control No. : 40889

    ** – Keywords                       6

    51  LOPES, A.N.M., et al

    Shrinkage-reducing admixture : Effects on durability of

    high-strength concrete .

    ACI Mater J 2013 Jul-Aug; 110(4):  365-74

    E3810-11.

    Control No. : 40870

    52  MALIK, A.

    The client confidence we enjoy is enviable for this

    industry.

    Indian Cem  Rev 2014 February; 28(7):  68

    E3810-11.

    Control No. : 40920

    53  MANISEKAR, R. and SIVAKUMAR

    Strengthening of distressed RC beams by external

    prestressing : Experimental studies.

    Indian Concr J 2014 January; 88(1):  45-

    E3810-11.

    Control No. : 40916

    54  MANJIT SINGH

    Super-sulphated cement : Fluorogypsum acativated super

    sulphated cement .

    Indian Concr J 2013 August; 87(8):  39-45

    E3808-09.

    Control No. : 40840

    55  Md M Rehman and Md A Islam

    Epoxy resin-based concrete : Preparation and properties.

    Indian Concr J 2013 November; 87(11):  17-44

    E3810-11.

    Control No. : 40906

    56  MILLMAN, L.R. and GIANCASPRO, J.W.

    Three-dimensional optical profilometey analysis of the

    international concrete repair institute concrete surface

    profiles (CSPs)   .

    ACI Mater J 2013 Sept-Oct; 110(5):  519-28

    E3810-11.

    Control No. : 40891

    57  MOHAMMED HANEEFA, K., et al

    Thermal performance of limestone mortars for use in

    sodium cooled fast breeder reactors.

    Indian Concr J 2013 December; 87(12):  25-52

    E3810-11.

    Control No. : 40903

    58  MOORTHY,V.M.

    Rain cements is one of the best energy-efficient cement

    plants in Andhra Pradesh  .

    Indian Cem Rev 2014 February; 28(7):  40-41

    E3810-11.

    Control No. : 40928

    ** – Keywords                       7

     

    59  MOROZOV, A.S., et al

    Chloride-induced corrosion behavior of reinforcing steel

    in spent fluid cracking catalyst modified mortars  .

    Cem Concr Res 2013 May; 47:  1-7

    E3810-11.

    Control No. : 40861

    60  Mota, M., et al

    Tool for simplified design of byuildings : Reinforced

    concrete design guide facilitates the engineering of low-

    rise structures.

    Concr Inter 2014 September; 36(9):  38-42

    E3810-11.

    Control No. : 40881

    61  MULLER, F.

    Self-erecting sandwich flood barrier with facings of high

    performance concrete.

    Indian Concr J 2013 November; 87(11):  11-16

    E3810-11.

    Control No. : 40905

    62  NAMBI, S.

    Top of the range A-grade boiler  could have as much as 96

    percent efficiency.

    Indian Cem  Rev 2014 February; 28(7):  66

    E3810-11.

    Control No. : 40917

    63  NATARAJA, M.C., et al

    Utilisation of different types of manufactured sand as

    fine aggregate in cement mortor.

    Indian Concr J 2014 January; 88(1):  19-25

    E3810-11.

    Control No. : 40913

    64  NATH, R.and FAWAD, A.

    Coal scenario in India.

    Indian Cem Rev 2014 March; 28(8):  35-

    E3810-11.

    Control No. : 40923

    65  NICOLEAU, L., et al

    Di-and tricalcium silicate dissolutions .

    Cem  Concr Res 2013 May; 47:  14-30

    E3810-11.

    Control No. : 40863

    66  O’REILLY, M., et al

    Effect of corrosion inhibitors on concrete pore solution

    composition and corrosion resistance.

    ACI Mater J 2013 Sept-Oct; 110(5):  577-86

    E3810-11.

    Control No. : 40897

    67  PANG, X., et al

    Modeling the effect of curing temperature and pressure on

    cement hydration kinetics.

    ** – Keywords                       8

     

    ACI Mater J 2013 Mar-Apr; 110(2):  137-48

    E3810-11.

    Control No. : 40844

    68  PANT, V.K.

    Pyro-upgradation at Meghalaya Cements.

    Indian Cem  Rev 2014 February; 28(7):  52

    E3810-11.

    Control No. : 40921

    69  PELLEGRINO, C. and FALESCHINI, F.

    Experimental behavior of reinforced concrete beams with

    electric arc furnace slag as recycled aggregate .

    ACI Mater J 2013 Mar-Aapr; 110(2):  197-206

    E3810-11.

    Control No. : 40850

    70  PITHAWALA, C.

    We have used more than 80,000 tonnes of fly ash without

    any problem.

    Indian Cem  Rev 2014 February; 28(7):  64-

    E3810-11.

    Control No. : 40919

    71  RANADE, R., et al

    Composite properties of high-strength, high-ductility

    concrete .

    ACI Mater J 2013 Jul-Aug; 110(4):  413-22

    E3810-11.

    Control No. : 40875

    72  RANADE, R., et al

    Micromechanics of high-strength, high-ductility concrete

    ACI Mater J 2013 Jul-Aug; 110(4):  375-84

    E3810-11.

    Control No. : 40871

    73  RAVIKUMAR, D. and NEITHALATH, N.

    Electricity induced chloride ion transport in alkali

    activated slag concretes and the influence of

    microstructure.

    Cem  Concr Res 2013 May; 47:  31-42

    E3810-11.

    Control No. : 40864

    74  ROHIT,D.H.H., et al

    Expression for moment of resistance of Reinforced

    Concrete structural walls.

    Indian Concr J 2013 October; 87(10):  48-

    E3810-11.

    Control No. : 40912

    75  SANCHEZ-HERRERO, M.J., et al

    C4A3S hydration in different alkaline media.

    Cem Concr Res 2013 April; 46:  41-49

    E3810-11.

    Control No. : 40858

    ** – Keywords                       9

     

    76  SATISH KUMAR, Ch.N. and GUNNESWARA RAO, T.D.

    Torsional response of plain concrete members using mode-

    II fracture energy.

    Indian Concr J 2013 November; 87(11):  45-52

    E3810-11.

    Control No. : 40907

    77  SEN, S.

    Reduction in energy consumption can be achieved through

    productivity optimisation.

    Indian Cem Rev 2014 February; 28(7):  42-45

    E3810-11.

    Control No. : 40929

    78  SHARIQ, M., et al

    Modulus of elasticity, modulus of rupture and compressive

    strength relationships of concrete containing GGBFS.

    Indian Concr J 2013 November; 87(11):  53-60

    E3810-11.

    Control No. : 40908

    79  SINGH, B.

    Prtactical shear design of RC beams using modified

    compression field theory.

    Indian Concr J 2013 September; 87(9):  24-35

    E3810-11.

    Control No. : 40899

    80  SINHA, D.A., et al

    Properties of ternary blended steel fibre reinforced

    concrete.

    Indian concr J 2013 August; 87(8):  26-54

    E3808-09.

    Control No. : 40836

    81  SOLIMAN, A.M. AND NAHDI, M.L.

    Self-restraining shrinkage ultra-high-performance

    concrete mechanisms and evidence.

    ACI Mater J 2013 Jul-Aug; 110(4):  355-64

    E3810-11.

    Control No. : 40869

    82  SRINIVAS REDDY, Y.

    We sell solutions to complex bulk material handling needs

    Indian Cem Rev 2014 March; 28(8):  51-

    E3810-11.

    Control No. : 40925

    83  STARINIERI,V., et al

    Pre-hydration as a technique for the retardation of Roman

    cement mortars.

    Cem Concr Res 2013 April; 46:  1-13

    E3810-11.

    Control No. : 40854

    84  SUBRAMANIAN, N.

    Point of view : Alternative punching shear reinforcement

    for Reinforced concrete flat slabs .

    ** – Keywords                       10

     

    Indian Concr J 2014 January; 88(1):  33-44

    E3810-11.

    Control No. : 40915

    85  THIERY, M., et al

    Carbonation kinetics of a bed of recycled concrete

    aggregates : A laboratory study on model materials.

    Cem Concr Res 2013 April; 46:  50-65

    E3810-11.

    Control No. : 40859

    86  TORRENS-MARTIN, D., et al

    Hydration of calcium aluminates and calcium

    sulfoaluminate studied by raman spectroscopy.

    Cem  Concr Res 2013 May; 47:  43-50

    E3810-11.

    Control No. : 40865

    87  TRUSSONI, M., et al

    Fracture properties of c oncrete containing expanded

    polystyrene aggregate replacement.

    ACI Mater J 2013 Sept-Oct; 110(5):  549-58

    E3810-11.

    Control No. : 40894

    88  VISHWANATH, K.N. et al

    Influence of sustained elevated temperature on fly ash

    concrete.

    Indian Concr J 2014 January; 88(1):  26-44

    E3810-11.

    Control No. : 40914

    89  VISWANATHAN, N,A.

    Superfacial solutions like the settng up of a coal

    retgulator will change nothing .

    Indian Cem Rev 2014 March; 28(8):  28-

    E3810-11.

    Control No. : 40922

    90  VOGEL, H.M. and SVEKOVA, D.

    DISCUSSION ON : Evaluation of elastic modulus for high-

    strength concrfete.

    ACI Mater J 2013 Mar-Aapr; 110(2):  215-16

    E3810-11.

    Control No. : 40852

    91  WEI, Y. and HANSEN, W.

    Characterizing cracking potential of cementitious

    mixtures based on shrinkage and humidity drop rate.

    ACI Mater J 2013 July-Aug; 110(4):  433-40

    E3810-11.

    Control No. : 40877

    92  WILLE, K. and PARRA-MONTESINOS, J.

    DISCUSSIONE PAPER ON Effect of beam size, casting method,

    and support conditions on flexural behavior of ultra-high

    performance  fiber-reinforced concrete  .

    ACI Mater J 2013 Mar-Aapr; 110(2):  2017-18

    ** – Keywords                       11

     

    E3810-11.

    Control No. : 40853

    93  WILLE, K., and NAAMAN, E.E.

    Effect of ultra-high performance concrete in pullout

    behavior of high-strength brass-coated straight steel

    fibers  .

    ACI Mater J 2013 July-Aug; 110(4):  451-62

    E3810-11.

    Control No. : 40879

    94  YANG, K-H., et al

    Unrestrained  short-term shrinkage of calcium-hydroxide-

    based alkali-activated slag concrete.

    ACI Mater J 2013 Mar-Apr; 110(2):  127-36

    E3810.

    Control No. : 40843

    95  YU, R., et al

    Using dehydrated cement paste as new type of cement

    additive  .

    ACI Mater J 2013 Jul-Aug; 110(4):  395-402

    E3810-11.

    Control No. : 40873

    ** – Keywords                       12

    1  AIT-MOKHTAR, A., et al

    Experimental investigation of the variability of concrete

    durability properties.

    Cem Concr Res 2013 March; 45:  21-36

    E3808-09.

    Control No. : 40823

    2  ANON

    Bridging the quality-quantity gap .

    Indian Cem Rev 2013 July; 27(12):  28-33

    E3808-09.

    Control No. : 40808

    3  ANON

    Cement transportation : Glitches along the road .

    Ind Cem Rev 2013 October; 28(3):  24-31

    E3808-09.

    Control No. : 40812

    4  ARNOLD, J., et al

    Solution of the nonlinearpoisson-boltzmann equation :

    Application to ionic diffusion in cementitious materials.

    Cement and Concrete Research 2013 February; 44:  8-17

    E3808-09.

    Control No. : 40797

    5  BAJAD,M.K., et al

    Use of waste glass powder in concrete.

    Indian concr J 2013 July; 87(7):  54-60

    E3808-09.

    Control No. : 40833

    6  BAPAT, J.D.

    Cement industry – Moving towards sustainable growth.

    Ind Cem Rev 2013 October; 28(3):  61-63

    E3808-09.

    Control No. : 40819

    7  BINDIGANAVILE, V., et al

    Characterisation of early 20th century lime mortars from

    Mysore.

    Indian concr J 2013 August; 87(8):  13-25

    E3808-09.

    Control No. : 40835

    8  BUCK, J.J.

    Effect of microstructure on load-carrying and  energy-

    dissipation capacities of UHPC  .

    Cem Concr Res 2013 January; 43( )

    E3808-09.

    Control No. : 40789

    ** – Keywords                       1

     

    9  CHERIYAN, S.G. and SANTHANAM, M.

    Demystifying durability testing for Indian concrete

    construction industry .

    Indian concr J 2013 July; 87(7):  18-30

    E3808-09.

    Control No. : 40834

    10  CHOI,M.

    Lubrication layer properties during concrete pumping.

    Cem Concr Res 2013 March; 45(3):  69-78

    E3808-09.

    Control No. : 40827

    11  CHONG, K.

    Saving electrical energy.

    Ind Cem Rev 2013 October; 28(3):  62-

    E3808-09.

    Control No. : 40817

    12  DOHARE, Y.S., et al

    Low  power low cost envrionment monitoring and control

    through zigbee in underground mines .

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  283-86

    E3808-09.

    Control No. : 40785

    13  DONNELL, K.M., et al

    Demonstration of microwave method for detection of alkali

    silica reaction (ASR) gel in cement-based materials  .

    Cem Concr Res 2013 February; 44:  1-7

    E3808-09.

    Control No. : 40807

    14  DU, X., et al

    Microscopic effective mechanical properties of porous dry

    concrete.

    Cem Concr Res 2013 February; 44

    E3808-09.

    Control No. : 40805

    15  DUTRA, V.F.P., et al

    Homogenization approach to macroscopic strength criterion

    of steel fiber reinforced concrete .

    Cem Concr Res 2013 February; 44:  34-45

    E3808-09.

    Control No. : 40800

    16  FEITEIRA, J. and RIBEIRO, M.S

    polymer action on alkali-silica reaction in cement mortar

    Cem Concr Res 2013 February; 44:  97-104

    E3808-09.

    Control No. : 40806

    17  FERNANDEZ, J.M., et al

    Influence of nanosilica and a polycarboxylate ether

    superplacticizer on the performance of lime mortars.

    Cem Concr Res 2013 January; 43( ):  12-24

    E3808-09.

    ** – Keywords                       2

     

    Control No. : 40787

    18  GAO, X.X., et al

    Alkali-silica reaction (ASR) expansion : Pessimum effect

    versus scale effect.

    Cem Concr Res 2013 February; 44:  25-33

    E3808-09.

    Control No. : 40799

    19  GUPTA, J.

    Build handling equipment is one of the most neglected

    areas by plant designers.

    Ind Cem Rev 2013 October; 28(3):  68-

    E3808-09.

    Control No. : 40820

    20  HARIHARAN, V.

    Cement companies can realise major savings in freights

    byh conducting periodic freight audits.

    Ind Cem Rev 2013 October; 28(3):  54-59

    E3808-09.

    Control No. : 40818

    21  Kamal Kumar and Dinesh Satija

    Improving energy efficiency.

    Ind Cem Rev 2013 July; 27(12):  56-

    E3808-09.

    Control No. : 40811

    22  KLAUS, S.R., et al

    Hydration kinetics of CA2 and CA-Investigations performed

    on a synthetics calcium aluminate cement .

    Cem Concr Res 2013 January; 43:  62-79

    E3808-09.

    Control No. : 40791

    23  KUNTHER, W., et al

    Inflauence of bicarbonate ions on the deterioration of

    mortar bars in sulfate solutions.

    Cem Concr Res 2013 February; 44:  77-86

    E3808-09.

    Control No. : 40804

    24  LE SAOUT, G., et al

    Hydration of portland cement with addition  of calcium

    sulfoaluminates.

    Cem Concr Res 2013 January; 43:  81-94

    E3808-09.

    Control No. : 40793

    25  LESTI,M., et al

    CO2 stability of portland cementbased well cementing

    systems for use on carbon capture & storage (CCS) wells.

    Cem Concr Res 2013 March; 45:  45-54

    E3808-09.

    Control No. : 40825

    ** – Keywords                       3

     

    26  LUCAS, S,S,, et al

    Incorporation of titamium dioxide nanoparticles in

    mortars – Influence of microstructure in the hardened

    state properties and photocatalytic activity.

    Cem Concr Res 2013 January; 43:  112-20

    E3808-09.

    Control No. : 40796

    27  MA, S., et al

    Alite-ye’elimite cement : Synthesis and mineralogical

    analysis.

    Cem  Concr Res 2013 March; 45:  15-20

    E3808-09.

    Control No. : 40822

    28  MAJUMDAR,D., et al

    Revalidating strength – cementitious materials – water

    relationship for proportioning portland pozzolanacement

    concrete.

    Indian concr J 2013 July; 87(7):  50-53

    E3808-09.

    Control No. : 40832

    29  MEHTA, Y.

    Process of new rail terminals .

    Ind Cem Rev 2013 October; 28(3):  49-51

    E3808-09.

    Control No. : 40815

    30  NATALI MURRI, A., et al

    High temperature behaviour of ambient cured alkali-

    activated materials based on ladle slag.

    Cem Concr Res 2013 January; 43:  51-61

    E3808-09.

    Control No. : 40790

    31  OLARU, A.M., et al

    Water transport in cement-in-polymer dispersions at

    variable temperature studied by magnetic resonance

    imaging.

    Cem Concr Res 2013 February; 44:  55-68

    E3808-09.

    Control No. : 40802

    32  OLIVEIRA, I., et al

    New kinetic model to quantify the internal sulfate attack

    in concrete.

    Cem Concr Res 2013 January; 43:  95-104

    E3808-09.

    Control No. : 40794

    33  PATHAK, A.

    Getting the last mile connectivity with Indian railway

    network is an extremely tedious task .

    Ind Cem Rev 2013 October; 28(3):  42-45

    E3808-09.

    Control No. : 40814

    ** – Keywords                       4

     

    34  PETERSON, K., et al

    Observations of chloride ingress and calcium oxychloride

    formation inlaboratory concrete and mortar at 5 degree C

    Cem Concr Res 2013 March; 45(3):  79-

    E3808-09.

    Control No. : 40828

    35  PICHLER, B., et al

    Effect of gel-space ratio and microstructure on strength

    of hydrating cementitious materials : An engineering

    micromechanics approach.

    Cem Concr Res 2013 March; 45(3):  55-68

    E3808-09.

    Control No. : 40826

    36  POINOT, T., et al

    Impact of hydroxypropylguars on the early age hydration

    of portland cement.

    Cem Concr Res 2013 February; 44:  89-78

    E3808-09.

    Control No. : 40803

    37  PULIGILLA, S. and MONDAL, P.

    Role of slag in microstructural development and hardening

    of fly ash slag geopolymer  .

    Cem Concr Res 2013 January; 43:  70-80

    E3808-09.

    Control No. : 40792

    38  QUENNOZ, A. and SCRIVENER, K.L.

    Interactions betwwwen alite and C3A gyosum hydrations

    inmodel cements.

    Cem Concr Res 2013 February; 44:  46-54

    E3808-09.

    Control No. : 40801

    39  RAGHAVENDRA, Y.B. and ASWATH, M.U.

    Effect of self curing compound on the strength of high

    performance self compacting concrete.

    Indian concr J 2013 July; 87(7):  45-49

    E3808-09.

    Control No. : 40831

    40  RAJAMANE, N.P. and AMBILY, P.S.

    Fly ash as a sand replacement material in concrete – a

    study.

    Indian concr J 2013 July; 87(7):  11-34

    E3808-09.

    Control No. : 40829

    41  RAO, K.N.

    ACC strives to minimise its carbon footprint by turning

    all its operations green.

    Ind Cem Rev 2013 July; 27(12):  48-53

    E3808-09.

    Control No. : 40810

    ** – Keywords                       5

     

    42  REDDY, M.R.

    Building terminals in collaboration will be a winning

    proposition for everybody.

    Ind Cem Rev 2013 October; 28(3):  36-41

    E3808-09.

    Control No. : 40813

    43  SHERDIWALA, B.

    There is need for holistic training, in both technical

    aspects and managerial skills  .

    Ind Cem Rev 2013 July; 27(12):  34-35

    E3808-09.

    Control No. : 40809

    44  SINGH, S.B., et al

    Flexural response of ECC strengthened reinforced concrete

    beams .

    Indian concr J 2013 July; 87(7):  35-44

    E3808-09.

    Control No. : 40830

    45  TAYAL, R.

    Automated optimisation based logistics system can be

    modeled on delivery schedules.

    Ind Cem Rev 2013 October; 28(3):  52-53

    E3808-09.

    Control No. : 40816

    46  TRTNIK, G. and  GAMES, M.

    Use of frequency spectrum of ultrasonic P-waves to

    monitor the setting process of cement pastes.

    Cem Concr Res 2013 January; 43:  1-11

    E3808-09.

    Control No. : 40786

    47  WANG, B., et al

    1H NMR relaxometry as an indicator of setting and water

    depletion during cement hydration.

    Cem  Concr Res 2013 March; 45:  1-14

    E3808-09.

    Control No. : 40821

    48  WANSOM, S. and JANJATURAPHAN, S.

    Evaluation of fiber orientation in plant fiber-cement

    composites using AC-impedance spectroscopy .

    Cem Concr Res 2013 March; 45:  27-44

    E3808-09.

    Control No. : 40824

    49  YOUNSI, A., et al

    Accelerated carbonation of concrete with high contgent of

    mineral additions : Effect of interactions between

    hydration and drying .

    Cem Concr Res 2013 January; 43:  25-33

    E3808-09.

    Control No. : 40788

    ** – Keywords                       6

     

    50  YU, C., et al

    Mechanism of expansion of mortars immersed in sodium

    sulfate solutions .

    Cem Concr Res 2013 January; 43:  105-11

    E3808-09.

    Control No. : 40795

    51  ZILE, E.and ZILE, O.

    Effect of the fiber geometry on the pullout response of

    mechanically deformed steel fibers.

    Cem Concr Res 2013 February; 44:  18-24

    E3808-09.

    Control No. : 40798

    ** – Keywords                       7

    1  ABBASNIA, R., et al

    Evaluation of concrete drying shrinkage related to

    moisture loss.

    ACI Mater J 2013 May-June; 110(3):  269-78

    E3807-08.

    Control No. : 40736

    2  ANON

    Mining industry updates.

    J Mine, Metal  Fuels 2013 April; 61(4):  103-07

    E3808-09.

    Control No. : 40759

    3  Best practices in lignite mining in India.

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  147-51

    E3808-09.

    Control No. : 40763

    4  BHATTACHARYA, J.

    Enterprise building challenges of mining companies in the

    future.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  238-44

    E3808-09.

    Control No. : 40776

    5  BONDER,D., et al

    Alkali-activated natural pozzolan concrfete as New

    construction material.

    ACI Mater Jl 2013 May-June; 110(3):  331-38

    E3807-08.

    Control No. : 40743

    6  BRENEK, R., et al

    Decontamination of a dumpsite of waste from mineral oil

    refineries in the Czech Republic, locality of Ostrava .

    J  Min Metal  Fuel 2013 Jan-Feb; 61(1&2):  31-36

    E3807-08.

    Control No. : 40748

    7  CHAUNSALI, P. and PEETHAMAPARAN, S.

    Novel cementitious binder incorporating cement kinl dust

    : Strength and durability.

    ACI Mater J 2013 May-June; 110(3):  297-304

    E3807-08.

    Control No. : 40739

    8  CHEN, P-H and CHUNG, D.D.L.

    Mechanical energy dissipation using  cement-based

    materials with axmixtures.

    ACI Mater J 2013 May-June; 110(3):  279-90

    E3807-08.

    Control No. : 40737

    ** – Keywords                       1

    9  CHITAMBO, K. AND KRISHNA, R.

    Predicting stope back caving and pillar failure using

    numerical modelling – a case study.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  270-74

    E3808-09.

    Control No. : 40783

    10  CHOUDHARY, B.S. , et al

    Stemming plug and its effect on fragmentation and

    muckpile shape parameters – a case study.

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  177-83

    E3808-09.

    Control No. : 40767

    11  CHOUDHURY, S. and PATRA, A.K.

    Critical review on importance of evaluation studies at

    different stages of a mining project.

    J Mine, Metal  Fuels 2013 April; 61(4):  82-87

    E3808-09.

    Control No. : 40756

    12  DAS, J.

    optimization of geodetic quadrilateral using goal

    programming.

    J Mine, Metal  Fuels 2013 April; 61(4):  88-92

    E3808-09.

    Control No. : 40757

    13  DOHARE, Y.S., et al

    Low  power low cost envrionment monitoring and control

    through zigbee in underground mines .

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  283-86

    E3808-09.

    Control No. : 40785

    14  DONGJUN, M., et al

    Duration of penetrating casing in hydraulic jetting

    drilling technique .

    J Mine, Metal  Fuels 2013 May; 61(5):  134-37

    E3808-09.

    Control No. : 40762

    15  GANDHE, A., et al

    Paste backfill – aims towards sustainable underground

    mining.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  219-24

    E3808-09.

    Control No. : 40773

    16  GHAZVINIAN,A., et al

    Failure analysis of transversely isotropic rocks – a

    numerical study.

    J  Min Metal  Fuel 2013 March; 61(3):  43-53

    E3708-09.

    Control No. : 40750

    ** – Keywords                       2

    17  GHOSE, A.K.

    Grand challenges of mining engineering in 21st century.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  255-56

    E3808-09.

    Control No. : 40779

    18  GHOSE, A.K.

    Rock bolting best practices for underground coal mining.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  252-54

    E3808-09.

    Control No. : 40778

    19  HUBBELL, D. AND GLISIC, B.

    Detection and characterization of early-age thermal

    cracks in high-performance concrete .

    ACI Mater Jl 2013 May-June; 110(3):  323-30

    E3807-08.

    Control No. : 40742

    20  HUDECEK, V., et al

    Experience in the mining of coal seams using plough

    systems in the Czech Republic.

    J  Min Metal  Fuel 2013 April; 61(4):  77-81

    E3708-09.

    Control No. : 40755

    21  HUNGERFORD, F.

    In seam directional drilling for improving safety and

    productivity in underground coal mines.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  213-18

    E3808-09.

    Control No. : 40772

    22  KALE, Y.G. and GUNDEWAR, C.S.

    Technology related policy initiatives in India’s non-coal

    mining sector.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  245-51

    E3808-09.

    Control No. : 40777

    23  KALE, Y.G. and YERPUDE, R.R.

    Environmental audit system for opencast mines –

    monitoring approach for green mining .

    J  Min Metal  Fuel 2013 Jan-Feb; 61(1&2):  5-18

    E3807-08.

    Control No. : 40746

    24  KUMAR REDDY, S.  and SASTRY, V.R.

    Gallery monitoring in blasting gallery panel during

    depillaring – a case study.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  257-60

    E3808-09.

    Control No. : 40780

    25  LASSINANTTI GUALTIERI, M.

    Full quantitative phase analysis of hydrated lime using

    the rietveld method.

    Cem Concr Res 2012 September; 42(9):  1273-79

    ** – Keywords                       3

    E3807-08.

    Control No. : 40732

    26  LAW, D.W. and EVANS, J.

    Effect of leaching on pH of surrounding water.

    ACI Mater J 2013 May-June; 110(3):  291-96

    E3807-08.

    Control No. : 40738

    27  MAGNUSKOVA, J., et al

    Issues orf brown coalmining decline in the Czech

    Republic .

    J Mine, Metal  Fuels 2013 May; 61(5):  129-33

    E3808-09.

    Control No. : 40761

    28  Mishra, A.K.

    Technological advancements in surface drilling rigs for

    mines and construction.

    J  Min Metal  Fuel 2013 Jan-Feb; 61(1&2):  1-4

    E3807-08.

    Control No. : 40745

    29  MISHRA, A.K., et al

    Innovative developments in drilling and blasting

    techniques for rapid excavation of drivages in mines   .

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  202-06

    E3808-09.

    Control No. : 40769

    30  MYERS, J.J. and TINSLEY, M.

    Impact resistance of blast mitigation material using

    modified ACI drop-weight impact test .

    ACI Mater Jl 2013 May-June; 110(3):  339-48

    E3807-08.

    Control No. : 40744

    31  NANDA, N,.K,.& KUMAR, S.

    Development in mining machinery and systems, both surface

    and underground for meeting the future challenges.

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  163-69

    E3808-09.

    Control No. : 40765

    32  OI, X.Y., et al

    Multiple simulation system for the training of mine

    rescue.

    J  Min Metal  Fuel 2013 March; 61(3):  60-64

    E3708-09.

    Control No. : 40752

    33  OZBAY, E., et al

    Effect of microcracking on frost durability of high-

    voluame-flyash and slag-incorporated engineered

    cementitious composites .

    ACI Mater J 2013 May-June; 110(3):  259-68

    E3807-08.

    Control No. : 40735

    ** – Keywords                       4

    34  PARTHA DAS SHARMA

    Cost effectiveness of open pit hard rock ore mining

    depends on explosives used in terms of energy/VOD, pit-

    slop angle and framing strategy for fragmentation   .

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  275-83

    E3808-09.

    Control No. : 40784

    35  PRADHAN, G.K.

    Recent advances in blasti ng.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  202-06

    E3808-09.

    Control No. : 40770

    36  QIN, W., et al

    Technology of pressure relief gas drainage in coal seams

    with low permeability based on mine ground pressure.

    J  Min Metal  Fuel 2013 March; 61(3):  71-76

    Control No. : 40754

    37  RAI, S., et al

    Causes of subsidence potentiality above old abandoned

    underground coal mines workinngs at Karharbari formation,

    Giridth, Jharkhand.

    J  Min Metal  Fuel 2013 Jan-Feb; 61(1&2):  37-42

    E3708-09.

    Control No. : 40749

    38  RAI, S., et al

    Economic importance of placer minerals in tghe context of

    world scenario .

    J Mine, Metal  Fuels 2013 May; 61(5):  124-28

    E3808-09.

    Control No. : 40760

    39  RAINA, A.K.

    Blast fregmentation assessment and optimization back to

    basics.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  207-12

    E3808-09.

    Control No. : 40771

    40  SAEMI,M., et al

    In-situ stress determination using limited geomechanical

    data in South of Iran.

    J  Min Metal  Fuel 2013 Jan-Feb; 61(1&2):  19-30

    E3807-08.

    Control No. : 40747

    41  SAHAY,N. and SINHA, A.

    Best practices to deal fire in Indian coal mines.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  264-69

    E3808-09.

    Control No. : 40782

    42  SARKAR, B.C. and PRAJAPATI, N.

    Geostatistical modelling of talabira-I coal

    seam,Sambalpur district Orissa with reference to grade

    ** – Keywords                       5

    requirement for ining by continuous surface miner .

    J  Min Metal  Fuel 2013 March; 61(3):  54-59

    E3708-09.

    Control No. : 40751

    43  SEN, A.

    Intellignet face drilling – can you afford not to do it.

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  184-93

    E3808-09.

    Control No. : 40768

    44  SIDDIQUI, M.S.

    Effect of curing water availbaility and composition on

    cement hydration .

    ACI Mater J 2013 May-June; 110(3):  315-22

    E3807-08.

    Control No. : 40741

    45  SINGH, G,

    Environmental issues with best management practices of

    responsible mining.

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  152-62

    E3808-09.

    Control No. : 40764

    46  SOROUSHIAN, P., et al

    Sustainable processing of cellulose fiber cement

    composites.

    ACI Mater J 2013 May-June; 110(3):  305-14

    E3807-08.

    Control No. : 40740

    47  SUNDARA RAMAN,D.B., et al

    Application of UMPS (Uninterrupted motive power supply)

    at primary crusher, Noamundi iron ore mine.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  261-63

    E3808-09.

    Control No. : 40781

    48  SURANA, D.M. and PARIHAR, S.K.

    Raising of tailing dam height at Rajpura Dariba mine.

    J  Min Metal  Fuel 2013 March; 61(3):  65-70

    E3708-09.

    Control No. : 40753

    49  THEINER, Y., et al

    Evaluation of the effects of dryhing shrinkage on the

    behavior of concrete structures strengthened by overlays

    Cem Concr Res 2012 September; 42(9):  1286-97

    E3807-08.

    Control No. : 40734

    50  TIWARI, P. and KARMAKAR, N.C.

    Analysis of slope stability of waste dump in mine.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  235-37

    E3808-09.

    Control No. : 40775

    ** – Keywords                       6

    51  TRIPATHY, S.K., et al

    Review on dolomite genesis, application and processing .

    J Mine, Metal  Fuels 2013 April; 61(4):  93-102

    E3808-09.

    Control No. : 40758

    52  XUAN, D., et al

    Backfill mining practice in China coal mines.

    J Mine, Metal Fuel 2013 Jul-Aug; 61(7&8):  219-24

    E3808-09.

    Control No. : 40774

    53  ZHAO, G.M., et al

    Discovery and practice of highly productive, efficient

    and mechanized coal mining technology for inclined, steep

    and high-altitude mining areas in Huainan, China   .

    J Mine, Metal  Fuels 2013 Jul-Aug; 61(7&8):  170-76

    E3808-09.

    Control No. : 40766

    54  ZHENG, J.J., et al

    Prediction of the detgree of hydration at initial setting

    time of cement paste with particle agglomeration.

    Cem Concr Res 2012 September; 42(9):  1280-85

    E3807-08.

    Control No. : 40733

    55  ZHOU, C., et al

    Geometry of crack network and its impact on transport

    properties of concrete.

    Cem Concr Res 2012 September; 42(9):  1261-72

    E3807-08.

    Control No. : 40731

     

    ** – Keywords                       7

    1  ANON

    Efficiency and sustainbility in latin America : Cost

    optimisation and sustainable development commitment :

    reducing power consumption in Lafarge Ecuador .

    World Cem 2012 September; 43(9):  16-23

    E3805-06.

    Control No. : 40640

    2  ANON

    Win Win : Redecam Group online two emission reduction

    projects fro Cemex in Costa Rica nd Colombia .

    World Cem 2012 September; 42(9):  24-28

    E3805-06.

    Control No. : 40641

    3  ANON

    XXIX technical congress in Costa Rica .

    World Cem 2012 September; 42(9):  38-42

    E3805-06.

    Control No. : 40643

    4  BABY, F. , et al

    Proposed flexural test method and associated inverse

    analysis for ultra-high-performance fiber-reinforced

    concrete.

    ACI Mater J 2012 Sept-Oct; 109(5):  545-56

    E3805-06.

    ** flexural, ultra-high-performance, fiber-reinforced.

    Control No. : 40663

    5  BANGI, M.R. and  HORIGUCHI, T.

    Effect of fibre type nd geometry on maximum pore pressure

    in fibre-reinforced high strength concrete at elevated

    temperatures  .

    Cem Concr Res 2012 February; 42(2):  459-66

    E3805-06.

    Control No. : 40635

    6  BENTZ, D.P., et al

    Influence of particle distributions on yield stress nd

    viscosity of cement-fly ash pastes .

    Cem Concr Res 2012 February; 42(2):  404-09

    E3805-06.

    Control No. : 40629

    7  BROWN, H.J.

    Advanced the ement nd concrete business by degrees.

    World Cement 2012 September; 43(9):  67-70

    E3805-06.

    Control No. : 40647

    ** – Keywords                       1

    8  BRUE, F., et al

    Effect of temperature on the water retention propertiesof

    two high performance concretes.

    Cem Concr Res 2012 February; 42(2):  384-96

    E3805-06.

    Control No. : 40626

    9  BRUECKNER, R., et al

    Effects of the thaumasite form of sulfate attack on skin

    friction at the concrete/clay interface.

    Cem Concr Res 2012 February; 42(2):  424-30

    E3805-06.

    Control No. : 40631

    10  Brungraber, G.

    Creep testing of epoxy-bonded reinforcing bar couplers.

    ACI Mater J 2012 Sept-Oct; 109(5):  499-502

    E3805-06.

    Control No. : 40657

    11  CAIRNS, J

    Lap splices of  bars in budies.

    ACI Struct J 2013 Mar-Apr; 110(2):  183-92

    E3807-08.

    ** Budies, splices.

    Control No. : 40693

    12  CELIK, A.O., et al

    Distributions of compressive strength obtained from

    various diameter cores.

    ACI Mater J 2012 Nov-Dec; 109(6):  597-606

    E3805-06.

    ** Compressive strength, diameter cores.

    Control No. : 40668

    13  CHEN, H.P. and ALANI, A.M.

    Optimized maintenance strategy for concrete structures

    affected by cracking due to reinforcement corrosion.

    ACI Struct J 2013 March-April; 110(2):  229-38

    E3807-08.

    Control No. : 40697

    14  Cyclic behavior of substandard reinforced concrete beam-

    column joints with plain bars.

    ACI Struct J 2013 Jan-Feb; 110(1)

    E3805-06.

    ** Cyclic behavior,  reinforced concrete,  beam-column

    joints,  plain bars.

    Control No. : 40691

    15  Design of anchor reinforcement for seismic shear loads.

    ACI Struct J 2013 January-February; 110(1):  53-62

    E3805-06.

    ** anchor reinforcement, seismic, shear loads.

    ** – Keywords                       2

    Control No. : 40683

    16  Discussion on phase-change materials on properties of

    concrete.

    ACI Mater J 2012 Nov-Dec; 109(6):  685-86

    E3805-06.

    ** phase-change, materials, properties, concrete.

    Control No. : 40677

    17  ELSOURI, A.M. and HARAJLI, M.H.

    Behavior of reinforced concrete wide concealed-

    beam/narrow-column joints under laterla earthquake

    loading.

    ACI Struct J 2013 March-April; 110(2):  205-16

    E3807-08.

    Control No. : 40695

    18  ELSOURI, A.M. and HARAJLI, M.H.

    Biaxial bending of reinforced concrete columns

    strengthened with externally applied reinforcement in

    combination with confinement.

    ACI struct J 2013 Mar-Apr; 110(2):  193-204

    E3807-08.

    Control No. : 40694

    19  EMRY, J.R., et al

    first-cut field method to evaluate limestone aggregate

    durabilaity.

    ACI Mater J 2012 Sept-Oct; 109(5):  557-64

    E3805-06.

    ** limestone, aggregatge.

    Control No. : 40664

    20  ERDEM, S., et al

    Influence of the micro and nonoscale local mechanical

    properties of the interfacial transition zone on impact

    behavior of concrete made with different aggregates.

    Cem Concr Res 2012 February; 42(2):  447-58

    E3805-06.

    Control No. : 40634

    21  FONTA, P.

    Getting the numbers right : CSI’S GNR data base programme

    and the benefits is provides to the international cement

    industry.

    World Cem 2012 September; 42(9):  52-

    E3805-06.

    Control No. : 40645

    22  GHAZY, M.F.

    Effect of using mortar interface and overlays on masonry

    behavior by using Taguchi method .

    ACI Mater J 2012 Sept-Oct; 109(5)

    E3805-06.

    Control No. : 40659

    ** – Keywords                       3

    23  GOELO, S., et al

    Fatigue analysis of plain and fiber-reinforced self-

    consolidating concrete.

    ACI Mater J 2012 Sept-Oct; 109(5):  573-81

    E3805-06.

    ** fatigue, fiber-reinforced.

    Control No. : 40666

    24  GUO, G. and JOSEPH, L.M.

    Shortening estimation for post-tensioned concrete floors

    Part II : Calculations.

    ACI Struct J 2013 January-February; 110(1):  35-42

    3805-06.

    Control No. : 40681

    25  HASSAN, A.A.A, et al

    Effect of metakaolin and silica fume on rheology of self-

    consolidating concrete.

    ACI Mater J 2012 Nov-Dec; 109(6):  657-64

    E3805-06.

    ** metakaolin, silica fume, rheology, concrete.

    Control No. : 40674

    26  HENRIQUES, , J., et al

    Tensile resistance of steel-reinforced anchorages :

    Experimental evaluation .

    ACI Struct J 2013 March-April; 110(2):  239-50

    E3807-08.

    Control No. : 40698

    27  HMAMI, A.A., et al

    Influence of mix proportions on microstructure and gs

    permebility of cement pastes and mortars  .

    Cem Concr Res 2012 February; 42(2):  490-98

    E3805-06.

    Control No. : 40639

    28  HUAND, L, et al

    Unified calculation method for symmetrically reinforced

    concrete section subjected  to combined loading.

    ACI Struct J 2013 Jan-Feb; 110(1):  127-36

    E3805-06.

    ** Unified calculation,.  method for symmetrically,

    reinforced concrete, combined loading.

    Control No. : 40690

    29  Hydraulic pressure cracking in rail seats of concrete

    crossties .

    ACI  Mater J 2012 Nov-Dec; 109(6):  639-46

    E3805-06.

    ** Hydraulic , pressure cracking,  rail seats, concrete

    crossties.

    Control No. : 40672

    ** – Keywords                       4

    30  IM, H.J, et al

    Cyclic loading test for reinforced-concrete-emulated beam

    column connection of precast concrete moment frame.

    ACI Struct J 2013 Jan-Feb; 110(1):  115-26

    E3805-06.

    ** Cyclic loading test, reinforced-concrete-emulated,

    beam-column,  connection,  precast concrete,  moment

    frame.

    Control No. : 40689

    31  Influence of specimen size and fiber content on mechanical

    properties of ultra-high-performance.

    ACI Mater J 2012 Nov-Dec; 109(6):  675-84

    E3805-06.

    ** fiber content, mechanical properties, ultra-high-

    performance.

    Control No. : 40676

    32  Innovative flexural strengthening of reinforced concrete

    columns using carbon-fiber anchors .

    ACI Struct J 2013 January-February; 110(1):  63-70

    E3805-06.

    ** Innovative,  flexural strengthening, reinforced

    concrete, carbon-fiber, anchors .

    Control No. : 40684

    33  JANAKA PERERA, S.V. and MUTSUYOSHI, H.

    Shear behavior of reinforced high strength concrfete

    beams.

    ACI Struct J 2013 January-February; 110(1):  43-52

    3805-06.

    ** Shear behavior,  reinforced,  high strength,

    concrfete beams.

    Control No. : 40682

    34  KEYSSNER, M. and SCHROEDER, B.

    vrm in South America.

    World Cem 2012 September; 42(9)

    Control No. : 40642

    35  KHALIQ, W. and KODUR, V.

    High temperature mechanical properties of high-strength

    fly ash concrete with and without fibres .

    ACI Mater J 2012 Nov-Dec; 109(6):  665-74

    E3805-06.

    ** temperature, mechanical properties, high-strength fly

    ash concrete, with fibres, with fibres.

    Control No. : 40675

    36  KUPWADE PATIL, K., et al

    Corrosion mitigation on reinforced concrete beams via

    nanoparticle treatment .

    ACI Mater J 2012 Nov-Dec; 109(6):  617-26

    ** – Keywords                       5

    E3805-06.

    ** mitigation, reinforced concrete, beams, nanoparticle.

    Control No. : 40670

    37  LANGE, A. and PLANK, J.

    Study on the foaming behavior of allyl either-based

    polycarboxylate superplasticizers.

    Cem Concr Res 2012 February; 42(2):  484-89

    E3805-06.

    Control No. : 40638

    38  LEIVA, C., et al

    Potential recycling of bottom and fly ashes in acoustic

    mortars and concretes.

    ACI Mater J 2012 Sept-Oct; 109(5):  529-36

    E3805-06.

    ** acoustic, mortars, recycling .

    Control No. : 40661

    39  LOTHENBACH, B., et al

    Hydration of a low-alkali CEM III/B-SiO2 cement (LAC).

    Cem Concr Res 2012 February; 42(2):  410-23

    E3805-06.

    Control No. : 40630

    40  LOURENCO, M.S,. and ALMEIDA, J.F.

    Adaptive stress field models : Assessment of design

    models.

    ACI Struct J 2013 Jan-Feb; 110(1)

    E3805-06.

    ** Assessment,  design models.

    Control No. : 40686

    41  LOURENCO, M.S. and  ALMEIDA. J.F.

    Adaptive stress field model : Formulation and validation.

    ACI Struct J 2013 Jan-Feb; 110(1):  71-82

    E3805-06.

    ** Formulation,.  validation.

    Control No. : 40685

    42  MAHESHWARI, M., et al

    Holistic approach for the cement industry.

    World Cement 2012 September; 43(9):  59-66

    E3805-06.

    ** cement industry.

    Control No. : 40646

    43  MARCOS  ORTEGA, J. et al

    Influence of environment on durability of fly ash cement

    mortars.

    ACI Mater J 2012 Nov-Dec; 109(6):  647-56

    E3805-06.

    ** – Keywords                       6

    ** durability, fly ash, cement mortars .

    Control No. : 40673

    44  MAXWELL-COOK, P.

    German equipment suppliers how the long-standing

    ‘backbone to the cement industry’is coping with Europe’s

    current financial climate.

    World Cem 2012 September; 42(9):  43-51

    E3805-06.

    Control No. : 40644

    45  MENSEL, M.

    Three become one : How intelligent design of spare motors

    can optimize plant availability.

    World Cement 2012 September; 43(9):  101-02

    E3805-06.

    Control No. : 40653

    46  Mustafa, A M

    Effect of Na-SiO2/N ratios and NaOH molarities on

    compressive strength of fly ash based geopolymer .

    ACI Mater J 2012 Sept-Oct; 109(5):  503-09

    E3805-06.

    .

    ** GEOPOLYMER, MOLARITIES , COMPRESSIVE STRENGTH.

    Control No. : 40658

    47  NORRIS, R.

    Strategies to maximise the value of online particle

    sizing.

    World Cement 2012 September; 43(9):  113-18

    E3805-06.

    Control No. : 40655

    48  NOSHIRAVANI, T. and BRUHWILAR, E.

    Experimental investigation on reinforced ultra-high-

    performance fiber-reinforced concrete composite beams

    subjected to combined bending and shear   .

    ACI Struct J 2013 March-April; 110(2):  251-62

    E3807-08.

    Control No. : 40699

    49  OH, J.E., et al

    Experimental determination of bulk modulus of 14A

    tobermorite using high pressure synchrotron X-ry

    diffraction .

    Cem Concr Res 2012 February; 42(2):  397-403

    E3805-06.

    Control No. : 40628

    50  OUESLATI, O. and DUCHESNE, J.

    Effect of SCMs on the corrosion of rer embedded in

    mortars subjected to an acetic acid attack .

    Cem Concr Res 2012 February; 42(2)

    E3805-06.

    ** – Keywords                       7

     

    Control No. : 40636

    51  OZBAY, E., et al

    Investigation of properties of engineered cementitious

    composites incorporating high volumes of fly ash and

    metakaolin.

    ACI Mater J 2012 Sept-Oct; 109(5):  565-72

    E3805-06.

    ** cementitious, fly ash, metakaolin .

    Control No. : 40665

    52  POLAK, M.A. and BU, W.

    Design considerations for shear bolts in punching shear

    retrofit of reinforced concrete slabs .

    ACI Struct J 2013 January-February; 110(1)

    3805-06.

    ** Design considerations, shear bolts, punching, shear

    retrofit,  reinforced concrete, slabs .

    Control No. : 40679

    53  POURCHET, S., et al

    Effect of the repartition of the PEG side chains on the

    adsorption and dispersion behaviors of PCP in presence of

    sulfate .

    Cem Concr Res 2012 February; 42(2):  431-39

    E3805-06.

    Control No. : 40632

    54  RATHORE, K.K., et al

    CFD solutions for the cement industry  .

    World Cement 2012 September; 43(9):  119-24

    E3805-06.

    Control No. : 40656

    55  RISER, A.

    Provide perspective on training control room operators

    based on CPI’s experiences in developing nd presenting

    training programmes to all levels of cement plants.

    World Cement 2012 September; 43(9):  71-74

    E3805-06.

    Control No. : 40648

    56  RITCHIE, I.

    Planning for best performance : Outlines the role of

    maintenance and asset management in optimising plant

    performance.

    World Cement 2012 September; 43(9):  89-94

    E3805-06.

    Control No. : 40651

    57  SADAOUI, A. and KHENNANE, A.

    Effect of transient creep on behavior of reinforced

    concrete beams in a fire .

    ACI Mater J 2012 Nov-Dec; 109(6):  607-16

    E3805-06.

    ** – Keywords                       8

    ** transient creep, concrete beams, fire.

    Control No. : 40669

    58  SAHMARAN, M., et al

    Combined effect of aggregate and mineral admixtures on

    tensile ductility of engineered cementitious composites

    .

    ACI Mater J 2012 Nov-Dec; 109(6):  627-38

    E3805-06.

    ** mineral admixtures, tensile admixtures, ductility.

    Control No. : 40671

    59  SANDER, J.

    When do synthetic lubricants makem sense : The different

    types of synthetic lubricants and the pplications re

    suited to.

    World Cement 2012 September; 43(9):  95-100

    E3805-06.

    Control No. : 40652

    60  SERGIO BOTASSI DOS SANTOS

    Early-age creep of mass concrete : Effects of chemical

    and mineral admixtures   .

    ACI Mater J 2012 Sept-Oct; 109(5):  537-44

    E3805-06.

    Control No. : 40662

    61  Shake-table studies of repaired reinforced concrete bridge

    columns using carbon fiber-reinforced polymer fabrics .

    ACI Struct J 2013 Jan-Feb; 110(1):  105-14

    E3805-06.

    ** reinforced concrete bridge,  carbon fiber-reinforced,

    polymer fabrics .

    Control No. : 40688

    62  SHARMA, A., et al

    Pivot hysteresis model parameters for reinforced

    concrfete columns, joints and structures.

    ACI Struct J 2013 March-April; 110(2):  217-28

    E3807-08.

    Control No. : 40696

    63  Shortening estimation for post-tensioned concrete floors –

    Part I : Model selection.

    ACI Struct J 2013 January-February; 110(1)

    3805-06.

    ** post tensioned, concrete slabs.

    Control No. : 40680

    64  SUZUKI, S.

    Maintenance with a twist – Modern concept in kiln tyre

    lubrition involving the evaluation of uniformity of kiln

    shell twist.

    World Cement 2012 September; 43(9):  80-88

    E3805-06.

    ** – Keywords                       9

    Control No. : 40650

    65  TAKAHASHI, S., et al

    Flexural drift capacoity of reinforced concrete wall with

    limited confinement.

    ACI Struct J 2013 Jan-Feb; 110(1):  Flexural,  drift,

    capacoity,  reinforced concrete,  wall,

    E3805-06.

    Control No. : 40687

    66  THOMAS, J.J., et al

    Density and water content of nnoscale solid C-S-H formed

    in alkali-activated slag (AAS) paste and implications for

    chemical shrinkage .

    Cem Concr Res 2012 February; 42(2):  377-83

    E3805-06.

    Control No. : 40627

    67  TOFT, E.

    Shares the company’s approach to the stimulation of

    knowledge sharing in the cement industryvia the web and

    through interaction .

    World Cement 2012 September; 43(9):  75-79

    E3805-06.

    Control No. : 40649

    68  TRISKA, M.A.T, et al

    Flexural anchorage behavior in diagonally cracked girders

    : Experiment.

    ACI Struct J 2013 March-April; 110(2):  263-74

    E3807-08.

    Control No. : 40700

    69  VALENZA  II, J.J.  and THOMAS, J.J.

    Permeability and elastic modulus of cement paste as a

    function of curing temperature.

    Cem Concr Res 2012 February; 42(2):  440-46

    E3805-06.

    Control No. : 40633

    70  VILONAVA, A., et al

    Mechanical properties of self-consolidating concrete

    using conventional concrete models.

    ACI Mater J 2012 Nov-Dec; 109(6):  587-96

    E3805-06.

    ** conventional, concrete models.

    Control No. : 40667

    71  VINCIPROVA, F.and OLIVETO, G.

    Ultimate strength domain of reinforced concrete sections

    under biaxial bending and axial load .

    ACI Struct J 2013 January-February; 110(1):  3-14

    3805-06.

    ** Ultimate strength, reinforced concrete,biaxial

    bending, axial load .

    Control No. : 40678

    ** – Keywords                       10

    72  WANG, R.

    Mastering fan system efficiency of the process fan

    system .

    World Cement 2012 September; 43(9):  103-12

    E3805-06.

    Control No. : 40654

    73  WONG, H.S., et al

    Estimating the permeability of cement pastes and mortars

    using image analysis and effective medium theory.

    Cem Concr Res 2012 February; 42(2):  467-75

    E3805-06.

    Control No. : 40637

    74  WU, S., et al

    Experimental study on dynamic axial tensile mechanical

    properties of concrete and its components  .

    ACI Mater J 2012 Sept-Oct; 109(5):  517-28

    E3805-06.

    ** axial tensile, properties, components.

    Control No. : 40660

    75  ZHOU, W., et al

    Experiment and analysis on X-shaped reinforced concrete

    joint in diagrid structures.

    ACI Struct J 2013 Mar-Apr; 110(2):  171-82

    E3807-08.

    ** X-shaped reinforced concrete, diagrid structures.

    Control No. : 40692

     

    ** – Keywords                       11

    Indexed Articles from Journals

    May 2013

    1  AHMED, E.., et al

    Performance evaluation of glass fiber-reinforced polymer

    shear reinforcement for concrete beams.

    ACI Structural Journal 2010 Jan-Feb; 107(1):  53-62

    ** glass, fiber-reinforced ,polymer, shear,

    reinforcement, concrete beams.

    Control No. : 40570

    2  AKHAVAN, A., et al

    Quantifying the effects of crack width, tortuosity, and

    roughness on water permeability of cracked mortars .

    Cem Concr Res 2012 February; 42(2):  313-20

    C3805-06.

    Control No. : 40619

    3  ALAEJOS, P. & LANZA, V.

    Influence of equivalent reactive quartz content on

    expansion due to alkali silica reaction.

    Cem Concr Res 2012 January; 42(1):  99-104

    Control No. : 40597

    4  ANON

    Efficiency and sustainbility in latin America : Cost

    optimisation and sustainable development commitment :

    reducing power consumption in Lafarge Ecuador .

    World Cem 2012 September; 43(9):  16-23

    E3805-06.

    Control No. : 40640

    5  ANON

    Win Win : Redecam Group online two emission reduction

    projects fro Cemex in Costa Rica nd Colombia .

    World Cem 2012 September; 42(9):  24-28

    E3805-06.

    Control No. : 40641

    6  ANON

    XXIX technical congress in Costa Rica .

    World Cem 2012 September; 42(9):  38-42

    E3805-06.

    Control No. : 40643

    7  BANGI, M.R. and  HORIGUCHI, T.

    Effect of fibre type nd geometry on maximum pore pressure

    in fibre-reinforced high strength concrete at elevated

    temperatures  .

    Cem Concr Res 2012 February; 42(2):  459-66

    E3805-06.

    Control No. : 40635

    8  BENTZ, D.P., et al

    Influence of particle distributions on yield stress nd

    viscosity of cement-fly ash pastes .

    Cem Concr Res 2012 February; 42(2):  404-09

    E3805-06.

    Control No. : 40629

    9  BONDAR, D., et al

    Oxygen and chloride permeability of alkali-activated

    natural pozzolan concrete.

    ACI Mater J 2012 Jan-Feb; 109(1):  53-62

    E3803-04.

    ** Oxygen, chloride permeability, alkali-activated ,

    natural, pozzolan concrete.

    Control No. : 40580

    10  BRUE, F., et al

    Effect of temperature on the water retention propertiesof

    two high performance concretes.

    Cem Concr Res 2012 February; 42(2):  384-96

    E3805-06.

    Control No. : 40626

    11  BRUECKNER, R., et al

    Effects of the thaumasite form of sulfate attack on skin

    friction at the concrete/clay interface.

    Cem Concr Res 2012 February; 42(2):  424-30

    E3805-06.

    Control No. : 40631

    12  by Serhan Guner and Frank J. V and Frnk J Vecchio

    Pushover Analysis of Shear-Critical Frames: Verification

    and application.

    ACI Structural Journal 2010 Jan-Feb; 107(1):  72-81

    E3801.

    ** shear critical frames.

    Control No. : 40568

    13  CHEN, I.A, et al

    Understanding expansion in calcium sulfoluminatebelite

    cements.

    Cem Concr Res 2012 January; 42(1):  51-60

    E3803-04.

    Control No. : 40592

    14  CHOI, H., et al

    Experimental Study of Reinforced Concrete Bridge Columns

    Subjected to Near-Fault Ground Motions.

    ACI Structural Journal 2010 Jan-Feb; 107(1):  3-12

    E3801.

    ** Reinforced concrete, ground motions.

    Control No. : 40565

    15  CHUNG, C-W., et al

    Setting time mesurement using ultrasonic wave reflection.

    ACI Mater J 2012 Jan-Feb; 109(1):  109-18

    E3803-04.

    Control No. : 40586

    16  David B. Birrcher, and Oguzhan Bayrak

    Effects of Increasing Allowable Compressive Stress at

    Prestress Transfer,.

    ACI Structural Journal 2010 Jan-Feb; 107(1):  21-31

    E3801.

    Control No. : 40567

    17  DUFFOE, G.S., et al

    Charcterizaion of steel rebars embedded in a 70-year old

    concete structure.

    Cem Concr Res 2012 January; 42(1):  111-17

    E3803-04.

    Control No. : 40599

    18  Effects of additives on properties of rapid-setting

    controlled low-strength material mixtures.

    ACI Mater J 2012 Jan-Feb; 109(1):  21-30

    E3803-04.

    ** additives, properties, rapid-setting, low-strength,

    material, mixtures.

    Control No. : 40577

    19  EISINAS, A., et al

    Effect of gyrolite additive on the hydration properties

    of portland cement.

    Cem Concr Res 2012 January; 42(1):  27-38

    E3803-04.

    Control No. : 40590

    20  ERDEM, S. , et al

    Impact  load-induced micro-structural damage and micro-

    structure associated mechanical response of concrete made

    with different surface roughness and porosity aggregates

    .

    Cem Concr Res 2012 February; 42(2)

    E3805-06.

    Control No. : 40617

    21  ERDEM, S., et al

    Influence of the micro and nonoscale local mechanical

    properties of the interfacial transition zone on impact

    behavior of concrete made with different aggregates.

    Cem Concr Res 2012 February; 42(2):  447-58

    E3805-06.

    Control No. : 40634

    22  ERDOGMUS, E. and TADROS, M.K.

    Fatigue Evaluation for Reinforced Concrete Box Culverts,

    by Hany Maximos.

    ACI Structural Journal 2010 Jan-Feb; 107(1):  13-20

    E3801.

    ** Reinfroced Concrete.

    Control No. : 40566

    23  FABBRI, A., et al

    Chemo-poromechanical nodel of oilwell cement carbonation

    under CO2 geological storage conditions.

    Cem Concr Res 2012 January; 42(1):  8-19

    E3803-04.

    Control No. : 40588

    24  FAN, W., et al

    New glass of organosilane-modified polycrboxylate

    superplasticizers with low sulfate sensitivity.

    Cement and Concrete Research 2012 January; 40(1):  166-72

    E3803-04.

    ** organosilane-modified,  polycrboxylate ,

    superplasticizers,  low sulfate sensitivity.

    Control No. : 40606

    25  FLOREA, M.V.A. & BROUWERS, H,J,H.

    Chloride binding related to hydration products – part I :

    Ordinary portland cement.

    Cem Concr Res 2012 February; 42(2):  282-90

    3805-06.

    Control No. : 40616

    26  FONTA, P.

    Getting the numbers right : CSI’S GNR data base programme

    and the benefits is provides to the international cement

    industry.

    World Cem 2012 September; 42(9):  52-

    E3805-06.

    Control No. : 40645

    27  GRUYAERT, E., et al

    Investigation of the influence of blast-furnace slag on

    the resistnce of concrete against organic acid or

    sulphate attack by means of accelerated degradation

    tests .

    Cement and Concrete Research 2012 January; 42(1):  173-85

    E3803-04.

    Control No. : 40607

    28  GUNER, S. and VECCHIO, F.J.

    Pushover analysis of shear-critial frames : Formulation.

    ACI Struct J 2010 Jan-Feb; 107(1):  63-70

    E3801.

    ** shear-critial, frames.

    Control No. : 40571

    29  HAHA, M.B., et al

    Influence of slg cheistry on the hydration of alkali-

    activated blast-furnace slag. Part II : Effect of Al2O3.

    Cem Concr Res 2012 January; 42(1):  74-83

    E3803-04.

    Control No. : 40594

    30  HENOCQ, P., et al

    Portlandite content and ionic transport properties of

    hydrated C3S pastes .

    Cem Concr Res 2012 February; 42(2):  321-26

    C3805-06.

    Control No. : 40620

    31  HMAMI, A.A., et al

    Influence of mix proportions on microstructure and gs

    permebility of cement pastes and mortars  .

    Cem Concr Res 2012 February; 42(2):  490-98

    E3805-06.

    Control No. : 40639

    32  IDIART, A., et al

    Numerical and experimental study of aggregate-induced

    shrinkage cracking cementitious composites.

    Cem Concr Res 2012 February; 42(2):  272-81

    E3805-06.

    Control No. : 40615

    33  ISABEL, M., et al

    Mechanical characterization of concrete roof tiles.

    ACI Mater J 2012 Jan-Feb; 109(1):  11-20

    E3803-04.

    ** Concrete, roof, tiles.

    Control No. : 40576

    34  ISKNDER, M., et al

    Apparent thermal coefficient of expansion of concrete

    building with restraint.

    ACI Mater J 2012 Jan-Feb; 109(1):  63-70

    E3803-04.

    ** Apparent, thermal coefficient , expansion, concrete

    building, restraint.

    Control No. : 40581

    35  JANSEN , D., et al

    Change in reaction kinetics of a portland cement caused

    by a superplasticizer – clculation of het flow curves

    from XRD data  .

    Cem Concr Res 2012 February; 42(2):  327-32

    C3805-06.

    Control No. : 40621

    36  JANSEN, D.

    Early hydration of ordinary portland cement (OPC) : An

    approach comparing measured het flow with calculated heat

    flow f.

    Cem Concr Res 2012 January; 42(1):  134-38

    E3803-04.

    Control No. : 40602

    37  JHA, K.K., et al

    Energy-based analysis of nanoindentation curves for

    cementitious materials.

    ACI Mater J 2012 Jan-Feb; 109(1):  81-90

    E3803-04.

    ** nanoindentation, curves, cementitious materials.

    Control No. : 40583

    38  KANG, T.H.K., et al

    Bar pullout tests and seismic tests of small-heated bars

    in beam column joints.

    ACI Struct J 2010 Jan-Feb; 107(1):  32-42

    E3801-02.

    ** seismic tests, bem column.

    Control No. : 40572

    39  KEYSSNER, M. and SCHROEDER, B.

    vrm in South America.

    World Cem 2012 September; 42(9)

    Control No. : 40642

    40  LACOMPTE, T., et al

    Cement based mixes : shering properties and pore pressure

    Cem Concr Res 2012 January; 42(1):  139-47

    E3803-04.

    Control No. : 40603

    41  LANGE, A. and PLANK, J.

    Study on the foaming behavior of allyl either-based

    polycarboxylate superplasticizers.

    Cem Concr Res 2012 February; 42(2):  484-89

    E3805-06.

    Control No. : 40638

    42  LEISINGER, S.M., et al

    Thermodynamic modeling of solid solutions between

    monosulfate and monochromate 3CaO Al2O3 Ca [(CrO4)x(SO4)1

    x]nH2O.

    Cem Concr Res 2012 January; 42(1):  158-65234

    E3803-04.

    Control No. : 40605

    43  LEL, L. and PLANK, J.

    Synthesis, working mechanism and effectiveness of a novel

    cycloaliphatic superplasticizer for concrte.

    Cem Concr Res 2012 January; 42(1):  118-23

    E3803-04.

    Control No. : 40600

    44  LIMBACHIYA, M., et al

    Performance of portland /silica fume cement concrete

    produced with recycled concrete aggregate.

    ACI Mater J 2012 Jan-Feb; 109(1):  91-100

    E3803-04.

    Control No. : 40584

    45  LIN, J., et al

    In situ measurement of the trnsport processes of

    corrosive species through a mortar layer by FTIR-MIR.

    Cem Concr Res 2012 January; 42(1):  95-98

    Control No. : 40596

    46  LINDGIRD, J.,et al

    Alkali silica reaction : Literature reviw on parameters

    influencing laboraroty performance testing.

    Cem Concr Res 2012 February; 42(2):  223-43

    E3803-04.

    Control No. : 40611

    47  LOTHENBACH, B., et al

    Hydration of a low-alkali CEM III/B-SiO2 cement (LAC).

    Cem Concr Res 2012 February; 42(2):  410-23

    E3805-06.

    Control No. : 40630

    48  MAXWELL-COOK, P.

    German equipment suppliers how the long-standing

    ‘backbone to the cement industry’is coping with Europe’s

    current financial climate.

    World Cem 2012 September; 42(9):  43-51

    E3805-06.

    Control No. : 40644

    49  Meshgin, P. and XI, Y.

    Effect of phase change materials on properties of

    concrete.

    ACI Mater J 2012 Jan-Feb; 109(1):  71-80

    E3803-04.

    Control No. : 40582

    50  Moon, J., et al

    High pressure study of low compressibility tetracalcium

    aluminum carbonate hydrates 3CaOnAl2O3nCa-CO3n11H2O.

    Cem Concr Res 2012 January; 42(1):  105-10

    E3803-04.

    Control No. : 40598

    51  NICHOLS, A.B.(A) and LANGE, D.A.

    Fracture surface-based toughness modeling of cement-based

    materials.

    ACI Mater J 2012 Jan-Feb; 109(1):  41-52

    E3803-04.

    Control No. : 40579

    52  O’NEIL, E.F., et al

    Development of frangible concrete to reduce blast-related

    casualities.

    ACI Mater J 2012 Jan-Feb; 109(1):  31-40

    E3803-04.

    ** frangible, concrete, reduce, blast-related,

    casualities.

    Control No. : 40578

    53  OGAWA, S., et al

    Improvement on sulfate resistance of blended  cement with

    high alumina slag.

    Cem Concr Res 2012 February; 42(2):  244-51

    E3805-06.

    Control No. : 40612

    54  OH, J.E., et al

    Experimental determination of bulk modulus of 14A

    tobermorite using high pressure synchrotron X-ry

    diffraction .

    Cem Concr Res 2012 February; 42(2):  397-403

    E3805-06.

    Control No. : 40628

    Last updated on :08/04/2016

    site
stats

    © 2018 NCB